Oil return line

Behold my hardline prowess:)


3/4″ stainless .065 wall. Used my Hossfeld bender with a 1 7/8″ radius tube die. All those years of building complex pipe rail finally paid off:)


Clears the dip stick nicely.


Another angle because…Why not.


Unfortunately I have to cut it as I created a line trap in that I can’t remove the line without removing the pan or the head. I figured that was going to be the case but I kept it one piece as it makes for a better overall fit. I’m going to cut it up under the manifold on the horizontal section and clamp a piece of high temp hose between them.


No biggie.


Leave a Reply

Your email address will not be published. Required fields are marked *